| Type | H×W(mm) | Contained wire (2.02 ) | Length |
| PXC3-20/15 | 20×15 | 5-10 PCS | 2m |
| PXC3-20/25 | 20×25 | 5-15 PCS | 2m |
| PXC3-25/25 | 25×25 | 10-20 PCS | 2m |
| PXC3-30/15 | 30×15 | 5-15 PCS | 2m |
| PXC3-30/20 | 30×20 | 10-20 PCS | 2m |
| PXC3-30/25 | 30×25 | 15-25 PCS | 2m |
| PXC3-30/30 | 30×30 | 20-40 PCS | 2m |
| PXC3-30/35 | 30×35 | 30-45 PCS | 2m |
| PXC3-30/45 | 30×45 | 40-55 PCS | 2m |
| PXC3-35/30 | 35×30 | 30-45 PCS | 2m |
| PXC3-35/35 | 35×35 | 35-50 PCS | 2m |
| PXC3-35/40 | 35×40 | 50-60 PCS | 2m |
| PXC3-40/25 | 40×25 | 20-25 PCS | 2m |
| PXC3-40/30 | 40×30 | 35-45 PCS | 2m |
| PXC3-40/40 | 40×40 | 60-70 PCS | 2m |
| PXC3-50/15 | 50×15 | 10-25 PCS | 2m |
| PXC3-50/25 | 50×25 | 25-45 PCS | 2m |
| PXC3-50/30 | 50×30 | 30-50 PCS | 2m |
| PXC3-50/35 | 50×35 | 50-60 PCS | 2m |
| PXC3-50/40 | 50×40 | 60-70 PCS | 2m |
| PXC3-50/45 | 50×45 | 70-80 PCS | 2m |
| PXC3-50/50 | 50×50 | 80-90 PCS | 2m |
| PXC3-50/55 | 50×55 | 100-110 PCS | 2m |
| PXC3-50/80 | 50×80 | 180-200 PCS | 2m |
| PXC3-50/100 | 50×100 | 210-260 PCS | 2m |
| PXC3-80/45 | 80×45 | 160-180 PCS | 2m |
| PXC3-80/50 | 80×50 | 180-200 PCS | 2m |
| PXC3-80/55 | 80×55 | 180-210 PCS | 2m |
| PXC3-80/80 | 80×80 | 240-290 PCS | 2m |
| PXC3-80/100 | 80×100 | 260-350 PCS | 2m |
| PXC3-100/100 | 100×100 | 300-400 PCS | 2m |
Cables and conduits provide a reliable and effective method to get power where it is needed, but this does not mean that it is always the best method. Busway can save space, while providing cheaper and more flexible power distribution solutions for applications that need to change and adapt. Wire troughs, also known as wire troughs, wiring troughs, and wire troughs, are electrical appliances used to organize power cables, data cables and other wire materials and fix them on the wall or ceiling. The cut surface is neat and free of burrs; the tooth shape is symmetrical; the cover plate and the groove are tightly interlocked with each other, which is easy to disassemble; it is not easy to break; the new flame-retardant material prevents material return. It is processed with new materials of good flame-retardant PVC, which has good insulation properties. It is mainly used for internal wiring of electrical equipment and has the functions of mechanical protection and electrical protection. After using the product, the wiring is convenient, the wiring is neat, the installation is reliable, and it is easy to find, repair and exchange lines. The groove teeth have good bending resistance, the joint surface is smooth, and the groove is not easy to break at 90°. There are teeth on the side, which are composed of a groove bottom and a groove cover, and there are outlet holes on both sides of the bottom groove. The special design of the trough cover and the combination of the trunking are not easy to slip off, preventing transportation vibration and sliding the cover during vertical installation. The blocking tooth design prevents the wire from shaking after being installed, preventing the wire from running out of the slot. The outlet hole is low, the combination is easy to disassemble, and it is easy to wire. The surface of the product is smooth and burr-free to prevent cuts and scratches. The cover and bottom of the nearby wiring groove are flush, and the surface of the wire is flat.